Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

2460 Harvest Lane
Springfield Oregon 97477

541-515-6084

Cowboy competition SASS focused firearm parts.  The finest custom firearms parts for the cowboy action competitive shooter internationally recognized as SASS. 

Pistols

1851 & 1860 Mason Army Conversion

With patents for the conversion of percussion revolvers, Colt® employees Charles Richards and William Mason cut off the cap-and-ball cylinders at the back and installed a conversion ring to accept cartridges. These conversion revolvers were favorites then and are enjoying popularity again as favorite reproductions.

Mason Navy Conversion

The Navy version of the C. Mason revolvers features a brass backstrap and triggerguard, octagonal barrel with brass post sight, and a smaller-size Navy grip. All C. Mason models feature a case-hardened forged steel frame, blued finish parts, modern ejector rod, and hammer with notched rear sight.

Barrel length/  caliber/  PGW price

4 ¾”              .38spl      $574
5 ½”                              $574
7 ½”                              $574

*Nickle Finish Special Order is an additional $80

Mason Army Conversion

The Army version of the C. Mason revolvers features a steel backstrap and triggerguard, round barrel with front blade sight, and a larger-size Army grip. All C. Mason models feature a case-hardened forged steel frame, blued finish parts, modern ejector rod, and hammer with notched rear sight.


Barrel length/    caliber    /PGW price

4 ¾”                  .38 spl           $599.20
5 ½”                  .45LC            $599.20
8”                                            $599.20

*Nickle Finish Special Order is an additional $80


1871 & 1872 Open Top Conversion

1872-OpenTopRevolvers.jpg

Although it appears to be a conversion, the 1871-72 Open Top model was Colt’s® first revolver specifically manufactured to fire a centerfire cartridge by incorporating the loading gate in the frame. Since Colt® did not use percussion revolver parts, the revolver was manufactured as an entirely new model, first with Navy-sized grips and later with Army-sized grips. All Open Top revolvers come with a case-hardened forged steel frame, round barrel with front blade sight, modern ejector rod, and a rear sight notch on the rear of the barrel.

Army Open Top Conversion

The Army version includes a steel backstrap and triggerguard with a larger-size Army grip.

Barrel length/  caliber/  PGW price

7 ½”                     .38spl      $568
                            .45LC       $568

*Nickle Finish Special Order is an additional $80

Navy Open Top Conversion

The Navy version includes a brass backstrap and triggerguard with a smaller Navy grip.


Barrel length/   caliber/   PGW price

4 ¾”                   .38spl         $568
5 ½”                   .45LC         $568
7 ½”                                      $568

*Nickle Finish Special Order is an additional $80


1873 Cattleman

The Cattle Brand revolvers were designed with a unique engraving and come in nickel finish with ivory or stag imitation grips.

 

Nickel Finish Cattleman

1873 Cattleman Nickel

1873 Cattleman Nickel

The Nickel finish cattleman features quality plating with charcoal blue screws. All nickel finish cattlemans are built on new model forged frames with several grip options to choose from. The custom grip options are hand-fit at the factory for an overall supreme finish on these revolvers. Grip choices include: polymer black, ivory, pearl, and classic walnut. All of the grips are one-piece and the standard Navy size found on the cattleman model.


Barrel length/ caliber  /PGW Prices
Polymer Pearl & Ivory grip
5 ½”            .45LC             $844.20
7 ½”            .45LC             $844.20

Black Buffalo Grip
5 ½”            .45LC             $844.20
7 ½”            .45LC             $844.20       

Nickel Walnut grip
4 ¾”            .45LC             $674.62
5 ½”            .45LC             $674.62
7 ½”            .45LC             $674.62  

4 ¾”            .357mag        $674.62
5 ½”            .357mag        $674.62
7 ½”            .357mag        $674.62

New Model Frame Cattleman

1873 Cattleman New Model CCH frame with steel bs & tg

1873 Cattleman New Model CCH frame with steel bs & tg

The New Model frame Cattleman is the most accurate reproduction of the peacemaker that won the west. New Model frame Cattlemans in the standard finish feature: case-hardened frame/hammer, blued steel parts, smaller Navy-size walnut grip, wider front fixed blade & rear sight frame notch, and spring-retained quick release cylinder pin. All New Model frames are forged.


Barrel length/ caliber  /PGW Prices
4 ¾”              .45LC          $568
                      44-40          $574
                     .38-40          $588.40
                     .357mag      $568
                     .32-20         $588.40

5 ½”              .45LC          $568
                      44-40         $574
                      .38-40        $588.40
                      .357mag     $568
                       .32-20       $588.40

7 1.2”            .45LC          $568
                      44-40        $574
                     .38-40        $588.40
                     .357mag     $568
                     .32-20        $588.40
 

1873 SA Cattleman Stainless Steel

1873 SA Cattleman Stainless Steel

The Stainless Steel cattleman in an ideal combination of a newer finish and classic revolver. All of the parts on these revolvers are stainless steel and put on a new model frame. This model comes fit with a standard Navy size walnut grip. Even with the extra durability of the stainless steel these revolvers still require normal firearm care, especially if the shooter is shooting black powder ammunition.


Barrel length/ caliber  /PGW Prices
4 ¾”              .45LC          $703.60
5 ½”              .45LC          $703.60
7 ½”              .45LC          $703.60

4 ¾”              .357mag     $715.60
5 ½”              .357mag     $715.60

1873 Cattleman Brand & Brass Stag

The Cattle Brand revolvers were designed with a unique engraving and come in nickel finish with ivory or stag imitation grips.

Barrel length/  caliber/ PGW price

*PVC grip

5 ½”               .357mag   $677.20
                         .45LC     $677.20
 *Stag horn grip

5 ½”               .357           $752.20
                       .45LC        $752.20

*CCH frame, brass bs & tg

4 ¾”                .45LC        $540.40
 

1873 Cattleman Birdshead Grip

1873 SA Cattleman Checkered Birdshead Grip

1873 SA Cattleman Checkered Birdshead Grip

The Birdshead Cattleman features the uniquely shaped birdshead grip on a new model forged frame. The popular birdshead grip can be ordered in either smooth or checkered finish. With its small "belly-gun" look the Birdshead model is a great addition to any collection.


Barrel length/   caliber/   PGW price

3 ½”              .357mag        $578.80
                      .45LC            $578.80

4 ¾”              .357mag        $578.80
                      .45LC             $578.80

*Checkered Birdshead

3 ½”              .357mag         $610
                      .45LC             $610

4 ¾”              .357mag        $610
                      .45LC             $610
 


The 1873 Cattleman High End

Cattleman with Antique Finish

1873 Cattleman Antique Finish

1873 Cattleman Antique Finish

The Cattleman Antique finish is applied to the entire revolver at the factory and could fool anyone for an original piece when done. The antique finish models are built on a new model forged frame with the durable aged finish applied to all parts (cared for like blued steel). Also during the antiquing process the grips are aged to look authentic to match the rest of the revolver.


Barrel length/    Caliber/    PGW price

3 ½”              .357mag     $679.60
4 ¾”              .45LC          $679.60
5 ½”                                 $679.60
 

Cattleman with Charcoal Blue Finish

1873 Cattleman Charcoal Blue

1873 Cattleman Charcoal Blue

The Charcoal Blue finish is a delicate over-oxidized bluing applied to new model forged frame cattlemans. When new it is a bright blue color and over time with use it will naturally patina to a soft grey. All parts are charcoal blued except for the case hardened frame and hammer. The aging process takes a long time with this finish, but is very beautiful.


Barrel length/  caliber/ PGW price

4 ¾”              .45LC       $642.40
5 ½”                               $642.40

4 ¾”              .357mag  $642.40
5 ½”                              $642.40

Cattleman with White Finish - Engraved

1873 Cattleman White Finish Engraved

1873 Cattleman White Finish Engraved

This cattleman model is photo engraved at the factory and then hand-chased by an engraver for extra depth. The photo engraved cattleman features a new model forged frame and white-heat treated finish (cared for like blued steel). This engraving pattern has mixed elements of floral, cross-hatch, and stippling. This engraved revolver is a gorgeous piece for any collection.


Barrel length/  caliber/ PGW price


4 ¾”                 .45LC         $938.75
5 ½”                 .357mag    $938.75
7 ½”                                    $938.75
 

Cattleman with Coin Finish

1873 SA Photo Engraved with Coin Finish Hardening

1873 SA Photo Engraved with Coin Finish Hardening

This cattleman is photo engraved and then hand-chased for extra depth at the factory. This particular model features a coin finish forged frame with steel blued parts over an all floral engraving pattern. The revolver comes with smooth walnut grips that are not pictured.


Barrel length/  caliber/ PGW price


4 ¾”               .45LC      $911.25
5 ½”              .357mag  $911.25

Cattleman with Floral Laser Photo Engraving

Cattleman Floral Lazer Photo Engraved

Cattleman Floral Lazer Photo Engraved

A Taylor’s & Co. exclusive, this revolver is laser-engraved in an all floral pattern and hand chased to give depth to the engraving. The Floral engraved Cattleman is built on a new model forged frame in a white heat-treated finish (treated like blued steel). With a simpler engraving pattern this model is an great economical option with excellent engraving.
    

Barrel length/  caliber/ PGW price

4 ¾”                     .45LC       $731.96
5 ½”                     .357mag  $731.96


 

Cattleman Old Model

Cattleman Old Model Frame

Cattleman Old Model Frame

The Cattleman Old Model frame is a replica of the original-style 1873 frame with a "fourth screw" in the frame to retain the cylinder pin. The Cattleman Old Model also features the traditional "doughnut" shaped ejector rod tab with the original thinner front blade & rear sight frame notch. Usually ordered in the standard finish, they come with a forged case hardened frame and blued steel parts. This is the perfect revolver for any shooter wanting a true original-style single action. The Cavalry version is usually ordered in the 7.5" .45LC configuration and comes with the US Cavalry stamps and grip cartouche.

    


Barrel length/   caliber/   PGW price

4 ¾”              .357mag    $574
                     .45LC

5 ½”              .357mag    $574
                      .45LC

7 ½”              .357mag    $574
                      .45LC

*Military stamp edition

7 ½”                .45LC      $613.60
 


The Bisley

Bisley

Bisley

The Bisley was originally designed as a target competition revolver with a lower hammer spur and a larger two-piece walnut grip frame. This all-time favorite stands out due to its unique overall look and is built on a new model forged cattleman frame. Bisley models are usually ordered in the standard cattleman finish with a case hardened frame and blued steel parts.


    

Barrel length/   caliber/   PGW price

4 ¾”              .357mag     $602.80
                     .45LC           $602.80

5 ½”              .357mag      $602.80
                     .45LC           $602.80

7 ½”               .357mag    $602.80
                      .45LC         $602.80


The Outlaw Legacy

Outlaw Legacy Engraved Blue

Outlaw Legacy Engraved Blue

The Outlaw Legacy Revolvers were designed with the Outlaw Gang to combine beautiful finish features with their organization's slogan "God-Guns-Freedom". The revolvers are manufactured by Pietta and come in a nickel or blued engraved finish option. Both finishes come with plain ivory grips.

Barrel length/   caliber/   PGW price

*Blue engraved

4 ¾”             .45LC       $551.20
                    .357mag   $551.20

*Nickel engraved

4 ¾”             .45LC        $620.80
                     .357mag   $620.80


The Runnin' Iron Series

The Taylor’s & Co. exclusive Runnin’ Iron series has proven to be a favorite of mounted and ground shooters alike! Originally it designed for the sport of mounted shooting by mounted shooter Denny Chapman and Wild West Showman Deke Rivers. Offered in stainless steel or blue finish, the Runnin’ Iron features a low-and-wide hammer spur, checkered one-piece walnut grip, and a wide trigger. These features make the Runnin’ Iron the lightest and most efficient mounted-shooting gun on the market today for shooting sports. 

The Taylor Tuned Runnin’ Iron comes ready to shoot out of the box featuring hand polishing and our custom springs. These features make the Runnin’ Iron the lightest and most efficient mounted-shooting gun on the market today for shooting sports. 

 

Runnin' Iron With Blue Finish

Runnin Iron Blue

Runnin Iron Blue

Barrel length/ caliber  /PGW Prices
3 ½”              .45LC          $624.40
4 ¾”              .45LC          $624.40
5 ½”              .45LC          $624.40

4 ¾”              .357mag      $624.40
5 ½”              .357mag      $624.40
    
 

Runnin' Iron Black Rock Finish

Runnin Iron Black Rock Series

Runnin Iron Black Rock Series

The Black Rock finish adds an extra edge to your shooting performance with a permanent extra durable finish. Black Rock finish allows for less lubrication, less cleaning effort, a smoother surface between parts to make an even smoother action, and extra resistance to any damage.


Barrel length/ caliber  /PGW Prices
3 ½”              .45LC     $684.40
4 ¾”              .45LC     $684.40

    


 

Runnin' Iron Stainless Steel Finish

Runnin Iron Stainless Steel

Runnin Iron Stainless Steel

Barrel length/ caliber  /PGW Prices
3 ½”              .45LC     $789
4 ¾”              .45LC     $789
5 ½”              .45LC     $789

4 ¾”             .357mag  $800.28
5 ½”             .357mag  $800.28


 


The Smoke Wagon

1873 Smoke Wagon

1873 Smoke Wagon

Exclusively from Taylor's & Co., The Smoke Wagon® is a second-generation, stagecoach-style, single-action revolver. It boasts a low-sitting hammer and wider-style sights that allow for faster sight acquisition. It also features a blue finish with a case-hardened frame, and a thin, richly detailed, checkered grip for comfort and improved aim.


    

Barrel length/ caliber  /PGW Prices
3 ½”              .357mag   $602.80
4 ¾”              .357mag   $602.80
5 ½”              .357mag   $602.80

3 ½”              .45LC       $602.80
4 ¾”              .45LC       $602.80
5 ½”              .45LC       $602.80

4 ¾”               44-40       $608.80
5 ½”               44-40       $608.80


The Stallions

The Stallion revolver is a smaller version of the popular 1873 Cattleman single action revolver. The Stallion is about 75% the size of a full-size Cattleman, but it boasts the unique look at feel of the popular six-shooter. The revolver is available in .22 LR which is a unique caliber for the single action design. It is a great piece for junior shooters, and it's lighter weight makes it ideal for multiple individuals. That stallion revolver does not come in special finishes. It features a blue finish with a case-hardened frame. 

Stallion Standard Grip Brass Strap

Stallion Standard Grip Brass Strap

Stallion Standard Grip Brass Strap

This grip option includes a Navy size grip with a brass backstrap and triggerguard. The brass parts can be kept polished with metal cleaners like Flitz.


    
Barrel length/       caliber/         PGW price

4 ¾”             .22LR/.22mag       $553.60
5 ½”                                           $553.60


 

Stallion Birdshead Grip

Stallion Pocket Birdshead Grip

Stallion Pocket Birdshead Grip

The birdshead grip option is a favorite on the full size cattleman as well and includes a steel backstrap & triggerguard.

Barrel length/  caliber/  PGW price
    

* Birdshead grip

3 ½”                 .38 spl       $540.40
4 ¾”                                   $540.40
5 ½”                                   $540.40


 

Stallion Pocket Standard Grip

Stallion Pocket Standard Grip

Stallion Pocket Standard Grip

The Stallion revolver is a faithful reproduction of the smaller scale 1873 single actions that were originally manufactured. Being a 3/4 scaled down size, the Stallion is lighter revolver available in the smaller pistol calibers. The forged stallion frame is similar to the new model cattleman frame with a spring retained cylinder pin. This is the ideal piece for youth shooters or anyone that appreciates a compact size revolver. The standard grip option is a Navy size grip with a steel backstrap and triggerguard.

    

Barrel length/  caliber/  PGW price

* Standard grip

3 ½”                 .38 spl       $540.40
4 ¾”                                  $540.40
5 ½”                                  $540.40


The 1873 Gambler

Taylor Gambler Revolver

Taylor Gambler Revolver

The Taylor Gambler features a fancy checkered walnut grip on a new model cattleman forged frame. Anyone that enjoys the enhanced feel of a checkered grip will love the upgraded checkering pattern on this model.

Barrel length/  caliber/  PGW price
4 ¾”              .357       $602.80
5 ½”                            $602.80


4 ¾”              .45LC    $602.80
5 ½”                            $602.80
 
 


The Marshal

Taylors Marshall Edition

Taylors Marshall Edition

The Taylor Marshal offers another custom grip option on the new model forged frame cattleman. The Marshal grip is a one-piece polymer aged ivory grip with rich checkering. The hand-fitting at the factory gives even more quality to this custom grip that would not be available by purchasing after market grips.


Barrel/   caliber/   PGW price
    
5 ½”    .45LC        $686.80
            .357mag   $686.80


 


The Ranch Hand

Ranch Hand Brass Strap

Ranch Hand Brass Strap

The Ranch Hand is built on the cattleman new model forged frame. It features all the best qualities of the cattleman design while boasting the flashy brass backstrap & triggerguard. Not only is the Ranch Hand a beautifully craft revolver, but also more economical. Besides the brass grip frame, the Ranch hand features a case hardened frame with the remaining blued steel parts, and a smaller Navy-size walnut grip. Maintenance for the steel portion of this revolver follows standard gun care and the brass parts can easily be kept polished looking with a metal cleaner like Flitz.

Barrel length/   caliber/   PGW price

4 ¾”              .357mag   $552.40
                     .45LC         $552.40

5 ½”              .357mag   $552.40
                     .45LC         $552.40


The Gunfighter

Gunfighter

Gunfighter

Navy Vs. Army Grip

Navy Vs. Army Grip

The Gunfighter model is the perfect solution for any shooter looking for more grip to hold on to. Taylor's installed the favorite 1860 Army grip onto the new model forged frame cattleman to accommodate the larger hand shooter. The Army grip is longer and slightly wider than the smaller Navy grip that is usually found on cattleman frames. This grip is available in smooth or checkered finish to suite any shooter's needs. 


 Barrel length/   caliber/   PGW price

4 ¾”               .357mag     $581.20
                       .45LC          $581.20

5 ½”               .357mag     $581.20
                       .45LC         $581.20

*Gunfighter checkered

4 ¾”                .357mag    $612.40
                        .45LC         $612.40

5 ½”                .357mag    $612.40
                        .45LC        $612.40