Rossi Rifle Parts.
Competition Rossi Rifle Parts
Stainless Steel Followers
Stainless Steel Follower
Rossi ‘92 Large Caliber
(44LC, 44-40, 44Spl.)
Made from stainless steel, these followers will help keep your magazine tube rust free. Rust can mix with dirt and fowling to cause improper feeding.
Stainless Steel Followers Rossi
$17
STAINLESS STEEL MAGAZINE SPRINg
Stainless Steel Magazine Spring
These springs are made from stainless steel, and will help keep your magazine free from rust. Rust can mix with fowling and dirt, causing a failure to feed properly. They are made to fit a 24" barreled gun, so if you're shooting a rifle with a shorter barrel, leave about 3" sticking out the end of the magazine tube and cut the rest off.
Stainless Steel Magazine Spring Rossi
$17
For Large Calibers
Call about smaller caliber fit
Stainless Steel Magazine Spring - Marlin 38 Caliber
This spring will work in Marlin 38 caliber rifles.
These springs are made from stainless steel, and will help keep your magazine free from rust. Rust can mix with fowling and dirt, causing a failure to feed properly. They are made to fit a 24" barreled gun, so if you're shooting a rifle with a shorter barrel, leave about 3" sticking out the end of the magazine tube and cut the rest off.
MARBLES REAR SIGHTS LONG & Short SHANK
Marbles Rear Sights
These rear sights are a good replacement for other rifle sights, and come in flat top, semi buckhorn, or full buckhorn styles.
These will fit a 3/8” dovetail slot.
MARBLES REAR SIGHTS LOnG & Short SHANK
$25
Be sure to check out our scratch&ding sale for sights!
MARBLES BRASS BEAD FRONT SIGHT
Marbles Brass Bead Front Sights
Made by Marble Arms, these front sights have a .093 brass bead. These will fit a 3/8” dovetail slot.
The .41" standard height sights work well with the Uberti rear semi buckhorn sights.
The Tall Marbles Brass Bead sight is .538".
MARBLES BRASS BEAD FRONT SIGHT Rossi
2 Styles—limited inventory both models
$16 Standard Marbles
$16 Tall Marbles
SPEED SIGHTS - FRONT RIFLE
Speed-Sight Front Rifle Sight - Standard Height
As the name implies, this sight will allow you to speed up your sight acquisition by drawing your eyes and your attention to the front sight, where they should be. This sight has a spherical 1/8" diameter brass bead surrounded by a black outline that will show up on any color target. This sight is .410" tall, which works well with Uberti and Marbles rear sights.
Speed-Sight Front Rifle Sight - Tall Height
This sight is .500" tall, and works well with tang mounted peep sights and taller Marbles rear sights.
These will fit a 3/8” dovetail slot.
SPEED SIGHTS - FRONT RIFLE Rossi
$42 Standard
$48 Tall